The Connect-It family consists of signal cables and speaker cables and has four families, increasing in price, namely the E-cable, S-cable, DS cable and RS cable. Pro-Ject supplies the signal cables with cinch plugs, XLR plugs or a combination.
Pro-Ject Audio Connect-It E-cable: entry-level cable
Pro-Ject's new cable series starts with the Connect-It E-cable. The cable has a tinned copper shield, 99.99% OFC conductors (OFC = Oxygen Free Copper) covered with transparent PVC and gold-plated brass plugs.
Pro-Ject's goal with the E-cable was to offer a neutral audiophile cable at a reasonable price. The cable is offered with various plugs, including cinch, 5-pin DIN and XLR.
Pro-Ject Audio Connect-It S cable
The Connect-It S cable also has an OFC conductor with a thermoplastic elastomer sheath and OFC shielding. Insulation material is made of polyethylene, similar to the Connect-It E.
The speaker cable is covered with transparent PVC with an S-sheath and uses four bare copper conductors of 0.75 mm2. The Connect-It S cables have gold-plated phosphor bronze plugs for durable and trouble-free operation. These cables are also available with different plugs.
Pro-Ject Audio Connect-It DS Cable
The Connect-It DS is the third cable in the series, made in Europe with higher quality materials. The cable is sheathed with special halogen-free TPE, an OFC spiral with conductive TPE sub-sheath shielding and conductors made of 99.99% OFC. The dielectric used for the DS cable is a special polyethylene with flexible cells.
The speaker cable has transparent PVC and a DS sheath, with eight 0.75 mm2 solid copper conductors
All plugs in the DS line feature silver-plated signal pins, which provide low contact resistance and high conductivity.
Pro-Ject Audio Connect-It RS Cable: Flagship cable
The Connect-It RS is the flagship cable, with a halogen-free TPE jacket, silver-plated OFC helix shielding with carbon sub-jacket and matching crystal silver conductors. Made in Europe, the cables feature rhodium-plated copper signal pins covered by a non-conductive carbon housing. The dielectric used for the RS cable is the same flexible cell polyethylene as in the DS cable.
The speaker cable incorporates high-purity OCC copper produced using a vertical vacuum casting technique and is used in the Connect-It RS LS speaker cable in a four-core configuration.
Pro-Ject Audio Connect-It: prices and delivery information
Prices for the Connect-It E start at 30 euros, for the Connect-It S at 80 euros and Connect-It DS cables start at 140 euros. The flagship Connect-It RS cables start from just under 500 euros.
Share your thoughts on this product
Do you own this product or maybe have questions about it? Feel free to share your comments below.